Attic Mold Testing And Removal in Seahurst, Washington You Can Trust

We find hidden attic mold, remove it, and prove your air is clean.

Attic Mold Testing And Removal in Seahurst, Washington is how you stop a hidden problem before it spreads through your home. Our IICRC-certified team inspects, tests, and removes attic mold across Seahurst, then confirms the fix with post-remediation testing. If you smell something musty upstairs or found dark staining on roof sheathing, we can be at your door fast.

A worker in protective gear uses a disinfectant spray indoors.

What Attic Mold Testing And Removal in Seahurst, Washington Involves

Attic mold testing and removal is the process of finding mold growth in your attic, identifying the moisture source feeding it, and safely removing it so it does not come back. We use a moisture meter and thermal imaging camera to trace leaks, a boroscope to check inside wall cavities, and lab air samples to confirm what is actually growing. Then we contain the area, run a HEPA vacuum and air scrubber, and treat the wood with an antimicrobial solution. Every job follows the ANSI/IICRC S520 Standard for mold remediation.

Seahurst homes deal with a specific set of attic mold triggers: wet winters, poor roof ventilation, and bathroom or kitchen exhaust fans that dump warm moist air straight into the attic instead of outside. That warm air hits cold roof sheathing and condenses, and mold starts growing within 24 to 48 hours. If you have been searching for attic mold removal near me Seahurst Washington, we handle the full job: inspection, testing, removal, and clearance testing so you know the problem is actually gone.

Why Seahurst Homeowners Choose Our Attic Mold Service

Why Seahurst Homeowners Choose Our Attic Mold Service

Attic mold does not fix itself, and painting over it does not work. Here is what you actually get when you call us for attic mold testing and removal in Seahurst.

Stop Mold Before It Spreads

Mold in the attic can drop spores into your living space through gaps around light fixtures and HVAC returns. We contain the work area with plastic sheeting and negative air machines so spores do not migrate into bedrooms. Most attic jobs are contained and cleaned within one to two days, and we verify with air sampling before we call it done.

Find the Real Moisture Source

Killing mold without fixing the moisture is a waste of money. We use a moisture meter and thermal imaging camera to trace the leak, whether it is a roof flashing issue, a bath fan venting into the attic, or condensation on cold sheathing. Fixing that source is what makes the removal last.

Clear Documentation for Your Records

Every attic mold inspection and remediation Seahurst job includes before-and-after photos, lab results, and a written scope of work. If you are selling your home, buying one, or filing an insurance claim, that paperwork matters. We provide it as standard, not as an upsell.

Safer Air for Your Family

Musty odors and toxic mold exposure can trigger headaches, coughing, and allergy symptoms, especially in kids and older adults. We use HEPA filtration and Benefect and Concrobium antimicrobial treatments to knock down spores and odors. After clearance testing, most customers tell us the upstairs smell is simply gone.

Our Attic Mold Testing and Removal Process

Every job follows the same five steps. You will know what is happening, what it costs, and when we will be done before we start swinging hammers.

1

Inspection and Testing

We walk the attic with a moisture meter, thermal imaging camera, and boroscope to map where mold is growing and where moisture is coming from. We take air samples and, when needed, surface samples for lab analysis. This step takes 60 to 90 minutes and gives you a clear picture of the problem.

2

Written Scope and Price

You get a written scope that spells out exactly what we will remove, what we will treat, and what it costs. No surprise add-ons. If the job is small, we tell you. If it is bigger than expected, we show you the photos and explain why.

3

Containment and Removal

We seal off the work area with plastic sheeting and run a negative air machine so spores cannot drift into your living space. Porous materials like wet insulation and moldy drywall get bagged and removed. Structural wood gets HEPA vacuumed, then treated with an antimicrobial solution.

4

Treatment and Air Cleaning

We apply antimicrobial and, where appropriate, an encapsulation coating to prevent regrowth. A fogging machine reaches into tight corners, and a HEPA air scrubber runs continuously to pull spores out of the air. This stage usually takes four to eight hours depending on attic size.

5

Clearance Testing

Before we pack up, we run post-remediation air samples and compare them to the outdoor baseline. If spore counts are not where they should be, we keep working at no extra charge. You get the lab report in writing, usually within 24 to 48 hours.

Five Years of Attic Mold Experience in Seahurst

Mold Remediation Service Seahurst has been removing attic mold since 2021. In that time we have handled hundreds of attic jobs across Seahurst and the surrounding south King County area, from 1920s bungalows near Seahurst Beach to newer construction in Eagle Landing. Our technicians hold IICRC WRT and AMRT certifications, and we work to the ANSI/IICRC S520 Standard on every job. We are an IICRC Certified Firm and carry Washington State Department of Labor & Industries contractor licensing.

  • IICRC Certified Firm with WRT and AMRT certified technicians on every attic job.
  • Five years serving Seahurst, Burien, and south King County attics since 2021.
  • ANSI/IICRC S520 Standard followed on every inspection, removal, and clearance test.
  • EPA Lead-Safe Certified for older Seahurst homes with pre-1978 construction.
  • OSHA 10 and OSHA 30 trained crews for safe containment and demolition work.
Five Years of Attic Mold Experience in Seahurst

Why Our Attic Mold Testing And Removal in Seahurst, Washington Stands Out

Plenty of companies will spray something on your attic and call it done. We test, remove, treat, and verify. Here is what makes our attic mold remediation Seahurst service different.

We Test Before and After

Every job starts with air sampling and ends with clearance testing. You get lab reports showing spore counts before and after, not just a handshake and a promise. That documentation is what protects you if you sell the home or file a claim.

We Fix the Moisture Source

Mold needs water. If we do not find and fix the leak, venting problem, or condensation issue feeding it, the mold comes back. We trace moisture with a thermal imaging camera and moisture meter, then tell you exactly what needs to change, whether that is a bath fan, roof repair, or added ventilation.

Local Seahurst Knowledge

We know the attic mold inspection Seahurst homeowners deal with: wet winters, tight roof decks, and older homes with undersized venting. We have worked in Seahurst Heights, Marine View, and Shorewood, and we know what to look for in each type of house.

Affordable Attic Mold Testing Seahurst Pricing

Attic mold testing and removal in Seahurst Washington does not have to break the bank. Most attic jobs run between $1,200 and $4,500 depending on square footage and how far the mold has spread. We give you a written price before we start, and we stick to it.

What Our Attic Mold Testing And Removal Includes

Every attic mold job we do in Seahurst includes the same core steps. We test, we remove, we treat, and we verify. If your attic needs extra work like insulation replacement or roof repair, we tell you upfront so there are no surprises.

What's Included

Full Attic Inspection

We walk the attic with a moisture meter, thermal imaging camera, and boroscope to find mold and the moisture feeding it. You get photos and a written summary of what we found and where.

Air and Surface Sampling

We take air samples and, when needed, surface samples for lab analysis. This tells you what type of mold is growing and how many spores are in the air. Results usually come back in 24 to 48 hours.

Containment Setup

We seal off the work area with plastic sheeting and run a negative air machine so spores cannot drift into your living space. This is standard on every job, not an add-on.

Mold Removal and Disposal

We HEPA vacuum surfaces, remove moldy insulation and drywall, and bag everything for disposal. Structural wood gets treated with an antimicrobial solution. We follow the ANSI/IICRC S520 Standard throughout.

Antimicrobial Treatment

We apply antimicrobial solutions and, where appropriate, an encapsulation coating to prevent regrowth. A fogging machine reaches tight corners and truss spaces that sprays cannot.

Post-Remediation Clearance Testing

We run air samples and compare them to the outdoor baseline. If spore counts are not where they should be, we keep working at no extra charge. You get the lab report in writing.

Attic Mold Problems We Solve for Seahurst Homeowners

Attic mold shows up in different ways depending on the house. Here are the most common problems we see in Seahurst and how we handle them.

Problem

Musty smell upstairs that will not go away

A persistent musty odor usually means active mold growth somewhere you cannot see. It can trigger allergies and headaches, and it gets worse over time.

Solution

We trace the odor to its source with a thermal imaging camera and moisture meter, test the air, and remove the mold. After treatment and clearance testing, the smell is gone because the mold is gone.

Problem

Dark staining on roof sheathing or rafters

Dark staining is often the first visible sign of attic mold. If left alone, it spreads across the roof deck and can rot the framing underneath.

Solution

We sample the staining to confirm what it is, contain the area, HEPA vacuum the surfaces, and treat the wood with an antimicrobial solution. If the framing is damaged, we tell you what needs repair.

Problem

Bath fan or dryer venting into the attic

Warm moist air dumped into a cold attic condenses on roof sheathing and feeds mold within 24 to 48 hours. This is one of the most common causes we find in Seahurst.

Solution

We remove the mold, then reroute the vent so it exhausts outside. Without that fix, the mold would come back. We handle the vent correction as part of the job when it is in scope.

Problem

Roof leak that soaked insulation and framing

Wet insulation holds moisture against wood and creates a perfect environment for black mold growth. The longer it sits, the further the mold spreads.

Solution

We remove the wet insulation, dry the structure with Dri-Eaz and Phoenix Restoration dehumidifiers, remove any mold, and treat the wood. Clearance testing confirms the attic is clean and dry.

Problem

Mold found during a real estate inspection

A flagged attic can delay or kill a sale. Buyers want proof the problem is fixed, not just a promise.

Solution

We provide a written scope, before-and-after photos, lab results, and clearance testing. That documentation is what gets the deal back on track. We work to real estate timelines whenever possible.

When to Call for Attic Mold Testing And Removal

1

You smell something musty in an upstairs bedroom or hallway and cannot find the source.

Solution:

We inspect the attic with a moisture meter and thermal imaging camera, take air samples, and identify whether mold is the cause. If it is, we remove it and treat the area.

Outcome:

You get a clear answer, a clean attic, and a lab report showing the air is back to normal.

2

You just had a roof leak or a burst pipe that soaked the attic insulation.

Solution:

We respond fast, dry the structure with Dri-Eaz and Phoenix Restoration dehumidifiers, and remove any mold that has started. Mold can begin growing within 24 to 48 hours of a water event.

Outcome:

The attic is dried, treated, and tested before mold has a chance to take hold.

3

You are buying or selling a home in Seahurst and the inspection flagged attic mold.

Solution:

We provide a written scope, lab testing, removal, and clearance documentation that satisfies buyers, sellers, and lenders. We work to real estate deadlines.

Outcome:

The deal moves forward with documentation proving the mold was properly removed.

4

You have noticed allergy symptoms or headaches that seem worse when you are home.

Solution:

We test the air in the attic and living space, compare spore counts to an outdoor baseline, and identify whether attic mold is affecting your indoor air quality.

Outcome:

You know whether mold is the problem and, if it is, we remove it and verify the air is clean.

5

Your attic has visible dark staining on the roof sheathing but you are not sure if it is mold.

Solution:

We sample the staining, confirm what it is, and explain whether it needs removal or just monitoring. Not every dark stain is mold, and we tell you honestly.

Outcome:

You get a definitive answer and a clear recommendation, with no pressure to buy work you do not need.

Tools and Methods We Use for Attic Mold Work

Tools & Equipment

Moisture Meter

Measures moisture content in wood and insulation to find where water is feeding the mold. We use it on every inspection to trace leaks to their source.

Thermal Imaging Camera

Reveals temperature differences that indicate hidden moisture behind sheathing, around chimneys, and near roof penetrations. It finds problems the eye cannot see.

Boroscope

A slim camera that lets us look inside wall cavities and behind framing without cutting open the structure. Useful for confirming mold spread beyond the attic.

HEPA Vacuum

Captures mold spores and fine debris that a shop vac would blow back into the air. We HEPA vacuum all surfaces before applying any liquid treatment.

Air Scrubber and Negative Air Machine

Runs continuously during removal to pull spores out of the air and keep the work area under negative pressure so spores cannot drift into your living space.

Fogging Machine

Applies antimicrobial solutions as a fine mist that reaches tight corners, truss spaces, and behind insulation where sprays cannot reach.

Dry Ice Blasting Machine

Blasts mold off structural wood using compressed dry ice pellets. It is fast, leaves no chemical residue, and does not damage the wood surface.

Methods

ANSI/IICRC S520 Standard

The industry standard for mold remediation. It defines how to contain, remove, clean, and verify mold work. We follow it on every job, which is why our documentation holds up for insurance and real estate.

Containment and Negative Air

We seal the work area with plastic sheeting and run a negative air machine so the attic stays under negative pressure. This keeps spores from migrating into bedrooms and living spaces during removal.

Antimicrobial and Encapsulation Treatment

After removal, we apply antimicrobial solutions like Benefect and Concrobium to kill remaining spores. Where appropriate, we apply an encapsulation coating to seal the wood and prevent regrowth.

Post-Remediation Clearance Testing

We take air samples after the work is done and compare them to an outdoor baseline. If spore counts are not where they should be, we keep working at no extra charge until they are.

How Attic Mold Testing And Removal Works in Seahurst

Seahurst sits right on Puget Sound, and that means wet winters, high humidity, and a lot of homes with roof decks that stay damp from October through April. Attic mold here is usually caused by one of three things: bath or kitchen exhaust venting into the attic instead of outside, inadequate roof ventilation, or a roof leak that soaked the insulation. Older homes near Seahurst Beach and Seahurst Town Center often have undersized venting and original roof sheathing that stays cold and wet. Newer construction in Eagle Landing and Gregory Heights tends to have tighter envelopes, which traps moisture and can make condensation worse. We adjust our approach based on the house. If you have been searching for attic mold remediation services Seahurst WA, we know what to look for in each type of home and we test before and after so you know the job is done.

Service Areas

Seahurst Beach

Homes closest to the water see the highest humidity and the most condensation on cold roof sheathing. We check venting carefully here.

Seahurst Town Center

Many older homes with original roof decks and undersized attic venting. Bath fan rerouting is a common fix.

Eagle Landing

Newer, tighter construction that can trap moisture. We look for condensation issues and HVAC-related moisture.

Gregory Heights

Mix of older and newer homes. Roof leaks around chimneys and skylights are common after heavy winter rain.

Marine View

Elevated lots with more wind-driven rain. We check flashing and roof penetrations closely for hidden leaks.

Local Considerations

Wet winters with 35+ inches of annual rain

Roof decks stay damp for months, which gives mold a long window to grow. We see more attic mold here than in drier parts of King County.

High humidity near Puget Sound

Coastal air keeps attics humid even when it is not raining. Ventilation and vapor control matter more here than inland.

Older homes with undersized attic venting

Without enough intake and exhaust venting, moist air sits in the attic and condenses on cold sheathing. We often recommend added venting as part of the fix.

Bath and kitchen fans venting into the attic

This is one of the most common causes we find in Seahurst. Warm moist air hits cold sheathing and mold starts within 24 to 48 hours.

Attic Mold Removed After Bath Fan Fix

Before

A 1950s Seahurst Town Center home had dark mold across 200 square feet of roof sheathing. The bath fan was venting straight into the attic, and the insulation was damp and musty. Air samples showed elevated spore counts inside the home.

After

We removed the moldy insulation, HEPA vacuumed and treated the sheathing with antimicrobial solution, and rerouted the bath fan outside. Clearance testing showed spore counts back to outdoor baseline levels within 48 hours.

Maintenance & Follow-up

Keep the bath fan running 15 to 20 minutes after showers and check the attic once each spring for new staining or musty odors.

Before

A roof leak near the chimney soaked insulation in a newer Eagle Landing home. Within a week, mold had started on the surrounding sheathing. The homeowner noticed a musty smell in the upstairs hallway.

After

We dried the structure with Dri-Eaz dehumidifiers, removed the wet insulation, treated the mold with Concrobium, and applied an encapsulation coating. Post-remediation air samples came back clean.

Maintenance & Follow-up

Have the roof flashing checked each fall before the rainy season and keep gutters clear so water does not back up under the shingles.

Before

A Seahurst Heights home was under contract when the buyer's inspector flagged mold on the roof sheathing. The seller needed documentation fast to keep the sale on track. Testing confirmed surface mold, not toxic mold.

After

We completed removal and treatment in two days and provided a written scope, before-and-after photos, and clearance lab results. The sale closed on schedule with no price reduction for mold.

Maintenance & Follow-up

Keep the clearance report with your home records. If you sell again, that documentation shows the attic was properly remediated.

Frequently Asked Questions About Attic Mold Testing And Removal

Have questions? We have answers.

Call Us
How much does attic mold testing and removal cost in Seahurst Washington?

Most attic mold testing and removal jobs in Seahurst run $1,200 to $4,500, with testing alone at $300 to $600. Small attic areas with surface mold on sheathing often land near the low end. Larger attics, wet insulation removal, or mold that has spread into wall cavities push the price higher. We give you a written price after the inspection, before any work begins.

How do I know if I have attic mold in Seahurst WA?

The three most common signs are a musty smell upstairs, dark staining on roof sheathing or rafters, and allergy symptoms that get worse when you are home. In Seahurst, mold often hides on the underside of roof decking where you cannot see it from the hatch. A moisture meter and thermal imaging camera find it in minutes. If you are not sure, an attic mold inspection and remediation in Seahurst WA is the fastest way to get a real answer.

Can attic mold be removed safely in Seahurst?

Yes. Attic mold can be removed safely when the work area is contained with plastic sheeting and a negative air machine, and when technicians wear respirators and protective suits. We HEPA vacuum the surfaces, apply an antimicrobial solution, and run a HEPA air scrubber to pull spores out of the air. Clearance testing confirms the air is clean before we finish.

Who does attic mold testing in Seahurst Washington?

Mold Remediation Service Seahurst does attic mold testing and removal across Seahurst, including Seahurst Town Center, Seahurst Beach, Eagle Landing, and Gregory Heights. We are an IICRC Certified Firm and follow the ANSI/IICRC S520 Standard. Call (833) 929-5837 to schedule an inspection, usually within one to two business days.

Licensed, Certified, and Local

Certifications

IICRC Certified Firm by Institute of Inspection, Cleaning and Restoration Certification
IICRC WRT (Water Restoration Technician) by Institute of Inspection, Cleaning and Restoration Certification
IICRC AMRT (Applied Microbial Remediation Technician) by Institute of Inspection, Cleaning and Restoration Certification
EPA Lead-Safe Certified by U.S. Environmental Protection Agency
Washington State Department of Labor & Industries Contractor License by Washington State Department of Labor & Industries

Reviews

Google

Found mold on our attic sheathing that two other companies missed. They used a thermal camera to trace the moisture to a bath fan venting into the attic. Removed the mold, fixed the vent, and tested the air before leaving. Worth every penny.

Yelp

We had a roof leak last winter and mold started in the attic. They responded the next day, dried everything out, and removed the moldy insulation. Clearance test came back clean. Professional crew and fair pricing.

BBB

Needed attic mold cleared for a home sale and they worked around our closing timeline. Provided all the documentation the buyer wanted. Sale closed without any issues. Highly recommend for anyone in the Seahurst area.

Google

Musty smell in the upstairs hallway for months. They tested the air, found elevated spores, and traced it to attic mold. Removed it, treated the wood, and retested. The smell is gone. Honest and thorough.

Related Services We Offer

Mold Inspection Near Me

If you are not sure whether the problem is in the attic or somewhere else, a full mold inspection near me visit covers the attic, crawl space, basement, and bathrooms in one trip. We map every moisture source and give you a written report.

Mold Inspection Near Me

Mold Inspection

A standard mold inspection covers visible growth, moisture readings, and air sampling. It is the right first step when you smell something musty but cannot find it. We use thermal imaging and a boroscope to check inside walls and ceilings.

Mold Inspection

Mold Testing

Mold testing tells you what type of mold is growing and how many spores are in the air. We use lab analysis to confirm black mold growth, toxic mold exposure risk, and whether the attic is the source. Results usually come back in 24 to 48 hours.

Mold Testing

Mold Testing Near Me

Searching mold testing near me in Seahurst usually means you want someone local and fast. We are based in Seahurst and can usually schedule testing within one to two business days. Same-day testing is available for urgent situations.

Mold Testing Near Me

Certified Mold Inspector

Our certified mold inspector holds IICRC AMRT credentials and follows the ANSI/IICRC S520 Standard. That matters because attic mold removal Seahurst WA work should be documented properly for insurance, real estate, or your own records.

Certified Mold Inspector

Black Mold Inspection

Black mold growth in an attic is common when roof sheathing stays wet. A black mold inspection confirms whether the dark staining you see is actually Stachybotrys or another species. We sample, test, and give you a clear answer before recommending removal.

Black Mold Inspection

Home Mold Inspection

A home mold inspection covers the whole house, not just the attic. If you have attic mold, there is a good chance moisture is also affecting the crawl space or a bathroom. We check all three in one visit so you get the full picture.

Home Mold Inspection

Residential Mold Testing

Residential mold testing is designed for homeowners who want clear answers without a commercial-sized price tag. We test air and surfaces, identify the mold species, and explain what needs to be removed versus what can be cleaned in place.

Residential Mold Testing

Commercial Mold Inspection

Commercial buildings with attic or roof-deck mold need documentation that satisfies insurers and tenants. We provide written scopes, lab reports, and clearance testing that hold up to scrutiny. Available for offices, retail, and multi-family properties in Seahurst.

Commercial Mold Inspection

Mold Remediation Company

As a mold remediation company, we handle the full job: inspection, testing, containment, removal, treatment, and clearance. You do not need to coordinate three different contractors. One call, one scope, one price.

Mold Remediation Company

Emergency Mold Testing Services

If a roof leak or burst pipe just soaked your attic, emergency mold testing services can catch growth before it spreads. Mold can start within 24 to 48 hours of a water event. Call us and we will get someone out fast.

Emergency Mold Testing Services

Same Day Mold Testing

Same day mold testing is available for urgent situations like a recent leak, a real estate deadline, or a strong musty odor you cannot ignore. Call before noon and we will do our best to get a technician to your Seahurst home the same day.

Same Day Mold Testing

Basement Mold Inspection

Basement mold and attic mold often share the same root cause: moisture finding its way in. If we find attic mold, we usually recommend a quick basement mold inspection too. It takes 20 minutes and can save you a second remediation bill.

Basement Mold Inspection

Air Quality And Mold Testing

Air quality and mold testing measures spore counts inside your home against an outdoor baseline. This is how we prove whether the attic is contaminating your living space. It is also how we confirm the job is done at clearance.

Air Quality And Mold Testing

Mold Remediation Near Me

If you are searching mold remediation near me in the Seahurst area, we are local. We serve Seahurst, Burien, Normandy Park, and the surrounding south King County communities. No long drive times, no out-of-area pricing.

Mold Remediation Near Me

Crawl Space Mold Removal

Crawl space mold and attic mold are the two most common hidden mold problems in Seahurst homes. If we find attic mold, we always check the crawl space. Both can be remediated in the same visit when the scope allows.

Crawl Space Mold Removal

Bathroom Mold Removal Service

Bathroom mold often feeds attic mold when a bath fan vents into the attic instead of outside. Our bathroom mold removal service fixes the visible growth and, when needed, reroutes the exhaust so the problem does not come back.

Bathroom Mold Removal Service

Toxic Mold Removal

Toxic mold removal is a higher level of containment and care. If lab results show Stachybotrys or elevated spore counts, we use stricter containment, HEPA filtration, and personal protective equipment. Clearance testing confirms the air is safe.

Toxic Mold Removal

Mold Abatement

Mold abatement is the removal and disposal of moldy materials, including insulation, drywall, and wood. We bag and dispose of everything according to Washington State rules. The attic is left clean, dry, and ready for new insulation.

Mold Abatement

Professional Mold Removal

Professional mold removal means containment, HEPA vacuuming, antimicrobial treatment, and clearance testing. It is not a spray-and-wipe job. If you want the mold actually gone and documented, this is the service to book.

Professional Mold Removal

Mold Cleanup Near Me

Mold cleanup near me searches usually mean someone found mold and wants it handled now. We handle cleanup for attics, crawl spaces, basements, and bathrooms. Call and we will schedule the soonest available slot.

Mold Cleanup Near Me

Water Damage Mold Remediation

Water damage mold remediation combines drying and mold removal. If a roof leak or pipe burst soaked your attic, we dry the structure with Dri-Eaz and Phoenix Restoration dehumidifiers, then remove any mold that has started.

Water Damage Mold Remediation

Mold Spore Testing

Mold spore testing measures the number and type of spores in the air. It is how we confirm whether attic mold is affecting your living space. We run spore trap samples and compare indoor counts to an outdoor baseline.

Mold Spore Testing

Post Remediation Mold Testing

Post remediation mold testing is the final step after removal. We take air samples and compare them to the outdoor baseline. If counts are not where they should be, we keep working at no extra charge until they are.

Post Remediation Mold Testing

Mold Fogging Treatment

Mold fogging treatment uses a fogging machine to reach into tight attic corners, truss spaces, and behind insulation where sprays cannot reach. We use it as a supplement to physical removal, not as a replacement for it.

Mold Fogging Treatment

Dry Ice Blasting Mold

Dry ice blasting mold removal uses compressed dry ice pellets to blast mold off wood framing without damaging the surface. It is fast, clean, and leaves no chemical residue. We use it on structural wood where media blasting would be too abrasive.

Dry Ice Blasting Mold

Affordable Mold Remediation

Affordable mold remediation does not mean cutting corners. It means scoping the job accurately so you are not paying for work you do not need. We give you a written price and stick to it, with no surprise add-ons.

Affordable Mold Remediation

24 Hour Mold Removal

24 hour mold removal is available for emergencies like a burst pipe or a roof leak that just soaked your attic. Mold can start growing in 24 to 48 hours. Call (833) 929-5837 any time and we will get someone out.

24 Hour Mold Removal

Odor Removal Mold

Odor removal mold service targets the musty smell that lingers even after visible mold is gone. We use HEPA filtration, fogging, and Benefect and Concrobium treatments to knock down odors at the source. Most customers notice a difference the same day.

Odor Removal Mold

Schedule Attic Mold Testing And Removal in Seahurst, Washington

If you smell something musty upstairs or see dark staining on the roof sheathing, do not wait. Mold spreads fast, and the longer it sits, the more it costs to fix. Call Mold Remediation Service Seahurst at (833) 929-5837 for a written price and a clear plan.