Professional Mold Removal in Seahurst, Washington That Gets It Right
Certified mold removal for Seahurst homes and businesses, done in days.
Professional Mold Removal in Seahurst, Washington is a full containment-and-removal service for homes and businesses dealing with black mold growth, musty odors, or water damage mold. We handle crawl spaces, attics, basements, bathrooms, and HVAC mold contamination. If you have seen spotting on drywall or smelled that damp, earthy odor, call (833) 929-5837 and we will scope it, test it, and remove it.
Professional Mold Removal in Seahurst, Washington
Professional Mold Removal in Seahurst, Washington is a containment-based remediation process that removes mold colonies, contaminated materials, and airborne spores from a building and then verifies the result with post-remediation testing. It is not a spray-and-wipe job. We set containment barriers, run a negative air machine with HEPA filters, remove porous materials like drywall and insulation, treat structural surfaces with antimicrobial solutions and encapsulation coatings, and clear the job only after moisture readings return to normal.
Seahurst sits close to Puget Sound, so marine air, fall rain, and winter condensation keep exterior walls and crawl spaces damp for months. That is why expert mold remediation Seahurst homeowners call for most often follows a slow leak, a failed sump, or a bathroom exhaust that vents into the attic instead of outside. If you have been searching for professional mold removal near me Seahurst Washington, we can be on site the same day to find the source before it spreads.
Why Seahurst Homeowners Choose Professional Removal
Mold spreads quietly behind drywall and under flooring. Professional removal stops the colony, removes the food source, and dries the structure so it does not come back next rainy season.
Verified Clearance Testing
We do not call a job done because it looks clean. After removal we run post-remediation mold testing with an InstaScope and air samples to confirm spore counts are back to normal outdoor baseline. Most Seahurst jobs clear in one round; if they do not, we re-treat at no extra charge.
Containment That Protects You
Removing mold without containment spreads spores through the house. We build plastic sheeting barriers, run a negative air machine with HEPA filters, and wear respirators and protective suits so the rest of your home stays clean. One Seahurst Heights job kept a family in the house during a 3-day crawl space remediation.
Moisture Source Fixed First
Mold returns if the water source stays. We use a moisture meter, thermal imaging camera, and boroscope to trace the leak into the wall cavity or under the slab. We fix the source or coordinate with your plumber, then dry the area with Dri-Eaz dehumidifiers before any removal begins.
Odor Gone, Not Covered
That musty smell is microbial volatile compounds, not just surface mold. We treat with Benefect and Concrobium, run air scrubbers, and use fogging machines for hard-to-reach cavities. Seahurst customers tell us the difference is obvious the first night back in the room.
Our 5-Step Mold Removal Process
Every job follows the same sequence so you know what is happening and when. Most Seahurst homes take 2 to 5 days from inspection to clearance.
Inspection and Testing
We arrive within 60 to 90 minutes on emergency calls. A certified mold inspector walks the property with a moisture meter, thermal imaging camera, and boroscope, then collects air and surface samples for mold spore testing. You get a written scope the same day with photos and a flat price.
Containment Setup
We seal the work area with plastic sheeting and duct tape, install a negative air machine with HEPA filters, and stage our equipment. Setup takes 1 to 2 hours on a typical crawl space or bathroom job. Your family can stay home in most cases.
Removal and Treatment
We remove drywall, insulation, and other porous materials that cannot be saved, then HEPA vacuum and treat structural framing with antimicrobial solutions and encapsulation coatings. Dry ice blasting machine work handles heavy growth on joists without water damage to the wood.
Drying and Air Scrubbing
Dri-Eaz dehumidifiers and Phoenix Restoration air scrubbers run for 24 to 72 hours depending on moisture readings. We check daily and adjust. The room is not released until wood moisture content is back under 16 percent.
Clearance Testing
A third-party inspector runs post-remediation mold testing with air samples and an InstaScope scan. You receive the lab report and a 1-year workmanship warranty. If clearance fails, we re-treat at no cost.
Five Years of Puget Sound Mold Experience
We have been removing mold in Seahurst since 2021, and in that time we have handled hundreds of crawl space, attic, and bathroom jobs across south King County. Our technicians hold IICRC WRT and AMRT certifications, and we work to the ANSI/IICRC S520 Standard for mold remediation. We are an IICRC Certified Firm, EPA Lead-Safe Certified, and carry a Washington State Department of Labor & Industries Contractor License. Every job is documented with photos, moisture readings, and lab results.
- IICRC Certified Firm with WRT and AMRT certified technicians on every job.
- ANSI/IICRC S520 Standard followed on containment, removal, and clearance.
- EPA Lead-Safe Certified for pre-1978 Seahurst homes with painted surfaces.
- OSHA 10 and OSHA 30 trained crews for safe containment and demolition work.
- 5 years serving Seahurst, Burien, and the greater Highline area since 2021.
Why Our Professional Mold Removal Stands Out
Plenty of companies will spray bleach and hand you a bill. We test, contain, remove, dry, and verify, and we put the scope and price in writing before we start.
Same-Day Emergency Response
Water damage mold spreads within 24 to 48 hours. We run 24 hour mold removal calls across Seahurst and can be on site within 60 to 90 minutes for active leaks. Call (833) 929-5837 any time and a live dispatcher answers.
Flat Pricing, No Surprises
You get a written scope and flat price after the inspection. Most Seahurst crawl space jobs land between $1,800 and $4,500, and bathroom jobs between $900 and $2,200. We do not add line items mid-job unless you approve new work.
Certified Mold Removal Seahurst Crews
Our technicians are IICRC AMRT certified and trained on 3M respirators, protective suits, and Fiberlock encapsulation products. They treat your home like their own, laying floor protection and cleaning up before they leave each day.
Clearance Tested, Warranty Backed
Every job ends with third-party post-remediation mold testing. If the lab report shows elevated spores, we re-treat at no cost. You also get a 1-year workmanship warranty on the removal itself, so you are covered through the next rainy season.
What Our Professional Mold Removal Includes
Every job includes inspection, containment, removal, drying, and clearance testing. We do not sub out the removal or skip the verification step. Add-ons like vapor barrier installation, HVAC cleaning, or drywall replacement are quoted separately after the inspection so you can see the full picture before you decide.
What's Included
Full Inspection and Scope
A certified inspector walks the property with a moisture meter, thermal imaging camera, and boroscope, then writes a room-by-room scope with photos and moisture readings. You get it the same day, before any work starts.
Containment and HEPA Filtration
We build plastic sheeting barriers, run a negative air machine with HEPA filters, and wear 3M respirators and protective suits. This keeps spores out of the rest of your home while we work.
Removal and Antimicrobial Treatment
We remove contaminated drywall, insulation, and debris, HEPA vacuum the framing, and treat with antimicrobial solutions and Fiberlock encapsulation coatings. Dry ice blasting is used on heavy growth where needed.
Drying and Air Scrubbing
Dri-Eaz dehumidifiers and Phoenix Restoration air scrubbers run for 24 to 72 hours. We check moisture daily and do not release the area until wood moisture content is under 16 percent.
Post-Remediation Clearance Testing
A third-party inspector runs air samples and an InstaScope scan after we finish. You get the lab report and a 1-year workmanship warranty. If clearance fails, we re-treat at no cost.
Mold Problems We Solve for Seahurst Homes
Most mold calls we get in Seahurst trace back to one of a handful of causes. Here are the ones we see most, and what happens if you leave them alone.
Crawl space mold from chronic dampness
Unchecked crawl space mold spreads to floor joists and subfloor, weakens wood over time, and pushes musty odors into living areas above.
We remove contaminated insulation, HEPA vacuum and treat the joists, install a vapor barrier, and verify with clearance testing. Most crawl space jobs in Seahurst take 2 to 4 days and run $1,800 to $4,500.
Attic mold from bathroom fans venting indoors
Moisture from showers condenses on cold roof sheathing, feeding mold across the attic deck. Left alone, it can rot sheathing and void roof warranties.
We test the attic, remove contaminated insulation and sheathing, treat the framing, and correct the venting so exhaust goes outside. We also check for blocked soffit vents, a common issue in older Seahurst homes.
Bathroom mold behind tile and caulk lines
Surface mold on caulk is a symptom. The colony usually extends into the drywall behind the shower, where it keeps spreading as long as moisture gets in.
We open the wall, remove affected drywall, treat the framing, and fix the ventilation or plumbing leak that caused it. Most bathroom jobs finish in 1 to 2 days for $900 to $2,200.
HVAC mold contamination spreading through the house
Mold growing in the air handler or ductwork blows spores into every room each time the system runs, which can trigger allergies and asthma symptoms.
We inspect the air handler and duct runs with a boroscope, clean contaminated components, and apply Benefect or Concrobium through a fogging machine. We also test the air before and after to confirm the fix.
When to Call for Professional Mold Removal
You found black mold growth on drywall after a slow plumbing leak under the sink.
We inspect the cabinet, use a moisture meter and thermal imaging camera to map how far the dampness spread, then remove affected drywall and treat the framing. Containment keeps spores out of the kitchen while we work.
Most under-sink jobs finish in 1 to 2 days, and clearance testing confirms the area is clean before we close it up.
Your crawl space smells musty and you saw white or black growth on the joists.
We remove contaminated insulation and debris, HEPA vacuum the framing, treat with antimicrobial solutions, and install a vapor barrier. Dri-Eaz dehumidifiers run until moisture readings are back to normal.
Crawl space jobs typically take 2 to 4 days and cost $1,800 to $4,500. The musty odor usually disappears within a week.
A pipe burst last winter and you are worried about water damage mold behind the walls.
We respond within 60 to 90 minutes, stop the water source, set containment, and dry the structure before removing any mold. Speed matters: mold can start growing within 24 to 48 hours of a leak.
Fast response often keeps the job small. Many emergency calls finish in 2 to 3 days with clearance testing included.
You are buying a Seahurst home and the inspection report flagged possible attic mold.
We run mold spore testing and a full attic inspection, then give you a written scope with photos and a flat price. You can use it to negotiate with the seller or to plan the work after closing.
Reports are usually ready in 24 to 48 hours, which keeps your closing timeline on track.
Tools and Methods We Use
Tools & Equipment
Moisture Meter and Thermal Imaging Camera
Find hidden dampness behind walls, under floors, and in crawl spaces before we open anything up. Thermal imaging shows temperature differences that point to trapped moisture.
Boroscope
Inspect inside wall cavities, ductwork, and ceiling plenums without tearing everything open. We use it to confirm how far mold has spread before writing the scope.
Negative Air Machine with HEPA Filters
Keep the work area under negative pressure so spores cannot escape containment. Every removal job runs one from setup to final cleaning.
Dri-Eaz Dehumidifiers and Phoenix Restoration Air Scrubbers
Dry the structure and scrub the air during and after removal. We run them 24 to 72 hours depending on moisture readings, and check daily.
Dry Ice Blasting Machine
Remove heavy mold growth from framing, joists, and block walls without water or chemicals. Leaves no residue and does not damage the wood surface.
Fogging Machine
Apply Benefect or Concrobium into wall cavities, HVAC ducts, and other spaces you cannot wipe by hand. Used as a supplement to physical removal, not a replacement.
InstaScope
Real-time airborne spore detection for pre- and post-remediation testing. Gives us immediate feedback so we know whether the job is ready for third-party clearance.
Methods
ANSI/IICRC S520 Standard
The industry standard for mold remediation. It defines containment requirements, removal procedures, and clearance criteria. We follow it on every job, from a single bathroom to a full crawl space.
Containment-First Setup
We build plastic sheeting barriers and run negative air before removing anything. This keeps spores out of the rest of your home and protects your family during the job.
HEPA Vacuuming and Antimicrobial Treatment
After removal, we HEPA vacuum all surfaces, then apply antimicrobial solutions and Fiberlock encapsulation coatings to the remaining structure. This stops regrowth on treated surfaces.
Post-Remediation Clearance Testing
A third-party inspector collects air samples and runs an InstaScope scan after we finish. The lab report is your proof the job worked. If it fails, we re-treat at no cost.
How Mold Removal Works in Seahurst
Seahurst sits on Puget Sound, and that marine climate drives almost every mold job we do here. Fall and winter rain keeps exterior walls and crawl spaces damp for months, and many homes were built before vapor barriers were standard. We size dehumidifiers for our humidity levels, use encapsulation coatings rated for wet environments, and often recommend a vapor barrier upgrade during crawl space work. Bathroom exhaust fans that vent into the attic are a common cause of attic mold in Seahurst, and we correct the venting as part of the job. If you need expert mold remediation in Seahurst WA, we know the local building stock and the moisture patterns that cause problems. Our crews carry the containment materials and drying equipment to handle any size job, and we schedule inspections within 24 hours, same-day for emergencies.
Service Areas
Homes closest to the water see the highest humidity and the most crawl space mold. We often recommend vapor barrier upgrades here.
Mid-century ramblers with original crawl spaces and no vapor barrier. Common jobs are crawl space mold removal and joist treatment.
Newer construction with tighter envelopes. When mold shows up here, it is usually from a plumbing leak or a bathroom fan venting into the attic.
Older homes with finished basements. We check foundation walls and floor drains for hidden dampness before scoping removal.
Attic mold from blocked soffit vents is common. We inspect ventilation and correct airflow as part of the remediation.
Local Considerations
Marine air and fall rain keeping exterior walls damp
Exterior wall cavities stay wet longer, so mold spreads further before it is visible inside. We use thermal imaging to map the full extent before removal.
Crawl spaces without vapor barriers in older homes
Ground moisture rises into the crawl space year-round. We install vapor barriers and size dehumidifiers to keep wood moisture content under 16 percent.
Bathroom exhaust fans venting into the attic
Shower moisture condenses on cold roof sheathing and feeds attic mold. We correct the venting as part of the job so the problem does not return.
Winter condensation on cold-water pipes and windows
Condensation drips onto framing and sills, creating small mold colonies that grow quietly. We treat these during inspection so they do not become bigger jobs.
Crawl Space Mold in Seahurst Heights
A 1950s rambler had visible black mold growth across 60 percent of the floor joists and no vapor barrier. The homeowner noticed a musty odor in the living room and called us after a wet winter.
We removed contaminated insulation, HEPA vacuumed and treated the joists, installed a 6-mil vapor barrier, and ran dehumidifiers for 48 hours. Clearance testing came back clean on the first round. Total job time was 3 days.
Maintenance & Follow-up
Keep the crawl space vents clear and check the vapor barrier once a year. We recommend a moisture check every fall before the rainy season starts.
An Eagle Landing home had mold across 200 square feet of roof sheathing. The bathroom exhaust fan had been venting into the attic for years, and the homeowner only noticed when a roofer pointed it out.
We removed contaminated insulation, treated the sheathing and framing with antimicrobial solutions, corrected the venting to exhaust outside, and installed new insulation. Clearance testing passed in 2 days.
Maintenance & Follow-up
Check that your bathroom fan vents outside, not into the attic. Run it for 15 to 20 minutes after every shower to keep attic humidity down.
A Seahurst Town Center condo had mold on the caulk line that kept coming back after cleaning. A moisture meter showed the drywall behind the shower was saturated from a slow valve leak.
We opened the wall, removed affected drywall, treated the framing, repaired the valve leak, and replaced the drywall. The job took 2 days and cost under $1,500. Clearance testing confirmed the area was clean.
Maintenance & Follow-up
Re-caulk shower seams every 2 to 3 years and run the exhaust fan during and after showers. Fix any drip promptly, even a slow one.
How much does professional mold removal cost in Seahurst Washington?
Most Seahurst jobs run $900 to $4,500 in 2026, with crawl spaces at the higher end and single bathrooms at the lower end. Attic jobs typically land between $1,500 and $3,500. Price depends on square footage, how much drywall or insulation has to come out, and whether the moisture source needs repair. We give you a flat written price after the inspection, before any work starts.
What makes professional mold removal different in Seahurst WA?
Seahurst's marine climate keeps exterior walls and crawl spaces damp from October through May, so we see more recurring crawl space mold and attic mold than inland cities. We size dehumidifiers for our humidity levels, treat with encapsulation coatings rated for wet environments, and often recommend a vapor barrier upgrade. That is why professional mold remediation Seahurst WA jobs need a contractor who knows Puget Sound moisture, not a generic national franchise.
How do I choose a professional mold removal company in Seahurst?
Ask three things: are they an IICRC Certified Firm, do they follow the ANSI/IICRC S520 Standard, and do they include post-remediation clearance testing in the price. A company that skips clearance testing cannot prove the job worked. Also confirm they carry a Washington State Department of Labor & Industries Contractor License and can show you a written scope. We check all four on every job.
Who does professional mold remediation in Seahurst Washington?
We do. Mold Remediation Service Seahurst has handled crawl space, attic, basement, and bathroom mold jobs across Seahurst since 2021. Call (833) 929-5837 and we will schedule an inspection, usually within 24 hours and same-day for emergencies. You get a certified mold inspector, a written scope, flat pricing, and a clearance report when we finish.
Licensed, Certified, and Reviewed
Certifications
Reviews
Fast response, clear pricing, and they actually tested the air after the job. Our crawl space in Seahurst Heights was a mess and they had it clean in three days. The clearance report gave us confidence the mold was really gone.
We had mold in the attic from a bathroom fan venting the wrong way. They explained everything, showed us photos, and fixed the venting as part of the job. No musty smell since. Highly recommend for anyone in Seahurst.
Professional from start to finish. Containment went up before any removal started, and they cleaned up every day. The bathroom job was done in two days for under $1,500. Fair price for the work.
Called on a Friday about a burst pipe and they were on site within 90 minutes. Stopped the water, set up drying equipment, and came back to remove the mold once everything was dry. Honest and thorough.
Related Services
Mold Inspection Near Me
Before any removal, we inspect. A certified inspector checks crawl spaces, attics, and wall cavities with a moisture meter and thermal imaging camera, then tells you exactly where the mold is and how far it has spread. Most inspections take 60 to 90 minutes.
Mold Inspection Near MeMold Inspection
Our standard mold inspection covers the full property, including areas you cannot see. We document findings with photos and moisture readings, then hand you a written report you can use for insurance or a real estate transaction. Same-week scheduling across Seahurst.
Mold InspectionMold Testing
Mold testing tells you what species you are dealing with and whether spore counts are elevated. We collect air and surface samples and send them to an accredited lab. Results come back in 24 to 48 hours, and we walk you through what they mean.
Mold TestingMold Testing Near Me
If you need mold testing near you in Seahurst, we can usually be on site the same day. We test air, surfaces, and HVAC returns, then pair the results with a visual inspection so you get the full picture, not just a lab number.
Mold Testing Near MeCertified Mold Inspector
Our certified mold inspectors hold IICRC AMRT credentials and follow the ANSI/IICRC S520 Standard. They inspect, test, and write the scope that our removal crew works from, so nothing gets missed between inspection and remediation.
Certified Mold InspectorBlack Mold Inspection
Black mold growth is not always toxic, but it always needs removal. We inspect for Stachybotrys and other black molds, test to confirm the species, and scope the removal. If it is in a crawl space or behind drywall, we find it with a boroscope.
Black Mold InspectionHome Mold Inspection
A home mold inspection covers every room, the attic, the crawl space, and the HVAC system. We check for musty odors, water stains, and hidden moisture. You get a room-by-room report with photos and a clear recommendation on what needs removal.
Home Mold InspectionResidential Mold Testing
Residential mold testing for Seahurst homes includes air samples in living areas and the crawl space, plus surface samples from any visible growth. We compare indoor counts to an outdoor baseline so you know whether you actually have a problem.
Residential Mold TestingCommercial Mold Inspection
Commercial mold inspection for Seahurst offices, retail, and rental properties includes HVAC mold contamination checks, ceiling plenum inspection, and moisture mapping. We work after hours to keep your business open and document everything for your property manager.
Commercial Mold InspectionMold Remediation Company
As a licensed mold remediation company, we handle the full job: inspection, containment, removal, drying, and clearance testing. One crew, one scope, one price. We work directly with your insurance adjuster and provide all documentation.
Mold Remediation CompanyEmergency Mold Testing Services
When you find mold after a burst pipe or a flooded basement, emergency mold testing services get you answers fast. We respond within 60 to 90 minutes across Seahurst, test on site, and start containment the same day if removal is needed.
Emergency Mold Testing ServicesSame Day Mold Testing
Same day mold testing is available for most Seahurst addresses when you call before noon. We collect samples, send them to the lab, and give you preliminary findings on site. Full lab results follow within 24 to 48 hours.
Same Day Mold TestingBasement Mold Inspection
Basement mold inspection focuses on the areas where water collects: floor drains, foundation walls, and under stairs. We use a moisture meter and thermal imaging camera to find hidden dampness, then scope removal and drying. Common in older Seahurst homes.
Basement Mold InspectionAttic Mold Testing And Removal
Attic mold testing and removal addresses the most common cause we see in Seahurst: bathroom exhaust fans venting into the attic instead of outside. We test, remove contaminated insulation and sheathing, treat the framing, and correct the venting so it does not return.
Attic Mold Testing And RemovalAir Quality And Mold Testing
Air quality and mold testing measures spore counts, humidity, and airborne particulates. We test before and after remediation so you can see the improvement in numbers. Useful for anyone with allergies or respiratory concerns.
Air Quality And Mold TestingMold Remediation Near Me
If you are searching for mold remediation near you in Seahurst, we cover the whole city and surrounding Highline neighborhoods. Call (833) 929-5837 and we will schedule an inspection, usually within 24 hours.
Mold Remediation Near MeCrawl Space Mold Removal
Crawl space mold removal is our most common Seahurst job. We remove contaminated insulation and debris, HEPA vacuum the joists, treat with antimicrobial solutions, install a vapor barrier, and verify with clearance testing. Most jobs take 2 to 4 days.
Crawl Space Mold RemovalBathroom Mold Removal Service
Bathroom mold removal service targets the caulk lines, grout, and drywall behind showers where moisture sits. We remove affected materials, treat the framing, and fix the ventilation issue so it does not come back. Most bathroom jobs finish in 1 to 2 days.
Bathroom Mold Removal ServiceToxic Mold Removal
Toxic mold removal follows stricter containment because species like Stachybotrys release mycotoxins. We seal the area, run negative air machines with HEPA filters, wear full protective suits, and clear the job with third-party testing. Documentation is provided for your records.
Toxic Mold RemovalMold Abatement
Mold abatement is the removal and disposal of mold-contaminated materials following the ANSI/IICRC S520 Standard. We bag and dispose of drywall, insulation, and debris properly, then treat the remaining structure. Full documentation provided.
Mold AbatementMold Cleanup Near Me
Mold cleanup near you in Seahurst means we handle the mess, the containment, and the disposal. You do not touch anything. We set up, remove, dry, and test, then clean the work area before we leave. Most jobs finish in 2 to 5 days.
Mold Cleanup Near MeWater Damage Mold Remediation
Water damage mold remediation starts with stopping the water. We coordinate with your plumber or roofer, then dry the structure with Dri-Eaz dehumidifiers and Phoenix Restoration air scrubbers before removing any mold. Fast action keeps the job smaller and cheaper.
Water Damage Mold RemediationMold Spore Testing
Mold spore testing measures airborne spore counts and identifies species. We take outdoor baseline samples and indoor samples, then compare. Results come from an accredited lab in 24 to 48 hours. This is the same test we use for clearance.
Mold Spore TestingPost Remediation Mold Testing
Post remediation mold testing verifies the job worked. A third-party inspector collects air samples and runs an InstaScope scan after removal and drying. If counts are still elevated, we re-treat at no cost. You get the lab report for your records.
Post Remediation Mold TestingMold Fogging Treatment
Mold fogging treatment uses a fogging machine to apply Benefect or Concrobium into wall cavities, HVAC ducts, and other spaces you cannot wipe by hand. It is a supplement to physical removal, not a replacement. We use it on most crawl space and attic jobs.
Mold Fogging TreatmentDry Ice Blasting Mold
Dry ice blasting mold removes growth from framing, joists, and block walls without water or chemicals. The dry ice pellets lift mold off the surface and leave no residue. We use it on heavy growth where sanding or wire brushing would damage the wood.
Dry Ice Blasting MoldAffordable Mold Remediation
Affordable mold remediation does not mean cutting corners on containment or clearance testing. We keep costs down by scoping tightly, removing only what has to go, and drying efficiently. Most Seahurst crawl space jobs land between $1,800 and $4,500.
Affordable Mold Remediation24 Hour Mold Removal
24 hour mold removal is available for active leaks and flooded areas. Call (833) 929-5837 any time and we will dispatch a crew. We stop the water source, set containment, and begin removal so mold does not get a 48-hour head start.
24 Hour Mold RemovalOdor Removal Mold
Odor removal mold work targets the musty smell that lingers after visible growth is gone. We treat with Benefect, run air scrubbers with HEPA filters and carbon, and use fogging machines for cavities. Most customers notice the difference the first night back in the room.
Odor Removal MoldGet Professional Mold Removal in Seahurst, Washington
Mold spreads fast, and every day you wait makes the job bigger. Call (833) 929-5837 and we will schedule an inspection, usually within 24 hours and same-day for emergencies. You get a certified inspector, a written scope, flat pricing, and a clearance report when we finish.