Odor Removal Mold in Seahurst, Washington That Clears the Air

We find the mold, kill the source, and remove the smell for good.

Odor Removal Mold in Seahurst, Washington is a full-source service: we locate hidden mold growth, remove it, and neutralize the musty odor it leaves behind in your air and building materials. If your Seahurst home or business smells damp, earthy, or like a wet basement, the smell is a symptom, not the problem. We treat the cause and the air.

Professional in protective gear sanitizing a modern living room with a fumigation machine.

Odor Removal Mold in Seahurst, Washington Explained

Odor Removal Mold in Seahurst, Washington is a remediation service that locates mold colonies, removes contaminated materials, and neutralizes the volatile organic compounds (VOCs) that create musty odors. Mold produces gases like 2-methylisoborneol and geosmin as it digests organic matter, and those gases cling to drywall, insulation, carpet, and HVAC components. We use moisture meters, thermal imaging cameras, and boroscopes to find the source, then HEPA vacuums, air scrubbers, and fogging machines to clear the air and surfaces.

Seahurst homes sit close to Puget Sound, where humidity averages 75% or higher for much of the year. That moisture feeds mold in crawl spaces, attics, and bathrooms. If you have been searching for musty odor elimination in Seahurst WA, the smell is likely coming from a colony you cannot see. We handle mold odor removal in Seahurst WA for homeowners, landlords, and commercial property managers who need the smell gone, not just masked.

Why Seahurst Homeowners Choose Our Odor Service

Why Seahurst Homeowners Choose Our Odor Service

Mold odor is not a cosmetic problem. It signals active growth, and it affects how your home feels and how guests, tenants, and buyers react. Here is what our service delivers.

Source-Level Odor Elimination

We do not spray air freshener. Our technicians remove mold-damaged drywall, insulation, and carpet, then treat framing with antimicrobial solutions. In a typical 1,200 sq ft crawl space, we remove 200-400 sq ft of contaminated insulation and fog the remaining structure. The musty smell elimination Seahurst residents ask for comes from removing the colony, not covering it.

Air Quality You Can Feel

A Dri-Eaz air scrubber with HEPA filters runs for 24-48 hours after physical removal, capturing spores down to 0.3 microns. We also clean HVAC components when contamination is present, because a dirty air handler recirculates mold odor through every room. Most customers notice a difference within one day of the scrubber running.

Clear Documentation for Your Records

We provide moisture readings, thermal images, and post-remediation verification. If you are selling a home near Seahurst Beach or filing an insurance claim, that documentation matters. Our reports follow the ANSI/IICRC S520 Standard, the industry benchmark for mold remediation, so your realtor, buyer, or adjuster can see exactly what was done.

Fast Response, Local Crew

We are based in Seahurst, so we can typically reach most neighborhoods within 60-90 minutes for emergency calls. If you have a burst pipe, a flooded crawl space, or a sudden musty smell after a storm, call (833) 929-5837. We will schedule an inspection, often the same day, and give you a written scope before work begins.

Our Odor Removal Mold Process in Seahurst

Every job follows a five-step process designed to remove mold, eliminate odor, and verify the result. Here is what you can expect from the first call to the final test.

1

Inspection and Testing

We start with a full inspection using moisture meters, thermal imaging cameras, and boroscopes to find hidden mold. If needed, we collect air and surface samples for lab analysis. This step usually takes 60-90 minutes for a single-family home. You get a written scope with photos and moisture readings before we begin any work.

2

Containment Setup

We seal off the work area with plastic sheeting and duct tape, then install a negative air machine to prevent spores from spreading. For crawl space jobs, we also lay down protective barriers on the ground. Setup takes 30-60 minutes depending on the size and location of the contamination.

3

Physical Removal

Our technicians remove mold-damaged drywall, insulation, and other porous materials. We HEPA vacuum all surfaces and use dry ice blasting or wire brushing on framing where needed. A typical bathroom mold job removes 20-50 sq ft of drywall; a crawl space can involve 200-400 sq ft of insulation.

4

Odor Neutralization

After physical removal, we treat the area with antimicrobial solutions like Concrobium or Benefect, then run a fogging machine to reach cavities and voids. We also use air scrubbers with HEPA filters and, when needed, a thermal fogger to neutralize odor molecules. This step runs 24-48 hours for most jobs.

5

Verification and Clearance

We perform post-remediation verification using moisture meters and, when requested, air sampling. If levels are clear, we remove containment and provide a final report. If not, we re-treat at no additional cost. Most customers get clearance within 3-5 days of the initial inspection.

Five Years of Mold and Odor Expertise

Mold Remediation Service Seahurst has been removing mold and musty odors since 2021. In that time, we have completed hundreds of jobs across South King County, from crawl space mold removal to attic mold testing and removal. Our team holds IICRC WRT and AMRT certifications, and we follow the ANSI/IICRC S520 Standard on every project. We are also an EPA Lead-Safe Certified Firm and carry a Washington State Department of Labor & Industries Contractor License. When you call us, you get trained technicians who understand mold science, not just cleaning.

  • IICRC Certified Firm with WRT and AMRT credentials on staff.
  • EPA Lead-Safe Certified Firm for pre-1978 homes common in Seahurst.
  • Washington State Department of Labor & Industries licensed contractor.
  • Five years serving Seahurst and surrounding South King County neighborhoods.
  • Hundreds of mold remediation jobs completed since 2021.
Five Years of Mold and Odor Expertise

Why Choose Our Odor Removal Mold in Seahurst, Washington

We are not a franchise or a national chain. We are a local company that lives and works in Seahurst. That means faster response, local knowledge, and accountability you can verify.

Local, Not a Franchise

We operate out of Seahurst, so we know the building stock, the climate, and the common mold problems here. When you call (833) 929-5837, you reach a local team that can be at your door in 60-90 minutes for emergencies. No call centers, no out-of-state dispatchers.

Certified and Insured

We hold IICRC WRT and AMRT certifications, are an EPA Lead-Safe Certified Firm, and carry a Washington State Department of Labor & Industries Contractor License. We are fully insured for both residential and commercial work. You can ask for proof of insurance before we start.

Odor Removal Mold in Seahurst Washington Done Right

We do not just treat the smell. We find and remove the mold colony causing it. Our process includes physical removal, HEPA vacuuming, antimicrobial treatment, and fogging. We verify with moisture meters and, when needed, air sampling. If the odor returns within 30 days, we re-treat at no cost.

Transparent Pricing, No Surprises

We provide a written scope and price before work begins. Most odor removal mold jobs in Seahurst range from $500 to $3,500 depending on the size and location of the mold. We do not add hidden fees or charge for unnecessary services. You approve the scope before we start.

What Our Odor Removal Mold Service Includes

Our odor removal mold service is a complete solution for musty odors caused by mold. We do not just treat the air; we remove the source. The scope below covers most standard jobs. If your situation requires additional work, we will let you know upfront.

What's Included

Full Mold Inspection

We inspect your entire home or business, focusing on crawl spaces, attics, basements, bathrooms, and HVAC systems. We use moisture meters, thermal imaging cameras, and boroscopes to find hidden mold. You get a written report with photos and moisture readings.

Containment and Negative Air

We set up plastic sheeting and duct tape to contain the work area. A negative air machine keeps spores from spreading to clean areas. This protects your family and your belongings during the removal process.

Physical Mold Removal

We remove mold-damaged drywall, insulation, carpet, and other porous materials. We HEPA vacuum all surfaces and use dry ice blasting or wire brushing on framing. All debris is bagged and disposed of properly.

Antimicrobial Treatment and Fogging

We apply antimicrobial solutions like Concrobium or Benefect to kill remaining mold and prevent regrowth. We then use a fogging machine to reach cavities and voids. This step is critical for odor elimination.

Air Scrubbing and Dehumidification

We run Dri-Eaz air scrubbers with HEPA filters for 24-48 hours to capture airborne spores. We also use Phoenix Restoration dehumidifiers to dry the area and prevent new mold growth. This step ensures the air is clean.

Post-Remediation Verification

We verify the work with moisture meters and, when requested, air sampling. If levels are clear, we remove containment and provide a final report. If not, we re-treat at no additional cost. Your satisfaction is guaranteed.

How We Solve Musty Odor Problems in Seahurst

Musty odors are a symptom of mold growth. If you ignore them, mold continues to spread and can damage your home and health. Here are the most common problems we solve for Seahurst residents.

Problem

Persistent musty smell in living areas

Mold spores circulate through your home, causing allergies, headaches, and respiratory issues. The smell gets worse over time and can affect resale value.

Solution

We locate the mold colony, remove contaminated materials, and treat the area with antimicrobials. We also run air scrubbers to clean the air. Most customers notice a difference within 24 hours.

Problem

Mold odor coming from crawl space

Crawl space mold often goes unnoticed until the smell rises into the living space. High humidity and poor ventilation make it a common problem in Seahurst.

Solution

We remove mold from crawl space framing and insulation, install vapor barriers, and fog the area. We also address drainage issues to prevent recurrence. This eliminates the source of the odor.

Problem

Musty smell after water damage

If water damage is not dried properly within 24-48 hours, mold grows and produces odors. Insurance may not cover mold remediation if it is considered neglect.

Solution

We provide emergency water damage mold remediation. We extract water, dry the structure, remove mold, and eliminate odors. We also document the work for your insurance claim.

Problem

Mold odor in HVAC system

Mold in your HVAC system recirculates musty air through every room. This can cause health issues and make your whole house smell.

Solution

We inspect and clean HVAC components, including ductwork and air handlers. We use HEPA vacuums and antimicrobial treatments. In some cases, we recommend duct cleaning or replacement.

When to Call for Odor Removal Mold in Seahurst

1

You notice a musty smell in your bathroom that does not go away after cleaning.

Solution:

We inspect for hidden mold behind walls, under floors, and in the ceiling. We remove moldy drywall, treat framing, and improve ventilation. We also check for leaks.

Outcome:

The musty smell is eliminated, and your bathroom is mold-free. You get a report showing moisture levels are normal.

2

You are buying a home in Seahurst and the inspection report mentions mold odor.

Solution:

We perform a full mold inspection and testing. We provide a remediation plan and estimate. If you proceed, we remove the mold and odors before closing.

Outcome:

You get a clean home and documentation for your lender. The sale can proceed without mold issues.

3

Your rental property has a mold smell that tenants are complaining about.

Solution:

We inspect the unit, identify the source, and remediate. We provide documentation for the property owner and tenant. We work with property managers to schedule around tenants.

Outcome:

Tenants are satisfied, and the property is mold-free. You avoid turnover costs and potential legal issues.

4

After a storm or plumbing leak, your basement smells musty.

Solution:

We respond quickly to extract water, dry the space, and remove mold. We use dehumidifiers and air scrubbers to prevent further growth. We also treat odors with fogging.

Outcome:

Your basement is dry and odor-free. We provide a report for your insurance claim.

Tools and Methods for Odor Removal Mold

Tools & Equipment

Moisture Meter

We use moisture meters to detect hidden moisture in drywall, wood, and insulation. This helps us find the source of mold growth before we start removal.

Thermal Imaging Camera

Thermal cameras reveal temperature differences that indicate moisture behind walls. We use them to map the extent of water damage and mold.

HEPA Vacuum

HEPA vacuums capture mold spores and debris down to 0.3 microns. We use them to clean surfaces after physical removal.

Air Scrubber

We use Dri-Eaz air scrubbers with HEPA filters to clean the air during and after remediation. They run for 24-48 hours to remove airborne spores.

Fogging Machine

Fogging machines distribute antimicrobial solutions into cavities and voids. This is essential for odor removal because it reaches areas that manual cleaning cannot.

Dry Ice Blasting Machine

Dry ice blasting removes mold from framing and hard surfaces without chemicals. We use it in attics and crawl spaces where wood framing is affected.

Dehumidifier

We use Phoenix Restoration dehumidifiers to dry the air and prevent new mold growth. They are critical after water damage.

Methods

ANSI/IICRC S520 Standard

We follow the ANSI/IICRC S520 Standard for mold remediation. This industry standard outlines procedures for containment, removal, cleaning, and verification. Following it ensures a safe and effective job.

Containment and Negative Air

We build containment barriers with plastic sheeting and duct tape. Negative air machines keep spores from spreading. This protects your family and your belongings.

Antimicrobial Treatment

We apply antimicrobial solutions like Concrobium, Benefect, and RMR-86 to kill mold and prevent regrowth. These products are EPA-registered and safe for use in homes.

Fogging

We use fogging machines to apply antimicrobial solutions as a fine mist. This reaches into cracks, crevices, and cavities where mold hides. It is a key step for odor elimination.

Post-Remediation Verification

We verify the work with moisture meters and air sampling. If mold levels are not clear, we re-treat. We provide a final report for your records.

How Odor Removal Mold Works in Seahurst

Seahurst's climate is mild and wet, with average humidity above 75% for much of the year. That moisture drives mold growth in crawl spaces, attics, and bathrooms. Many homes here were built before 1980 and lack modern vapor barriers or ventilation. We see a lot of crawl space mold, attic mold from roof leaks, and bathroom mold from poor exhaust fans. We also see mold after winter storms when water intrudes through foundations or roofs. Our local team knows these patterns. We tailor each odor removal mold in Seahurst Washington job to the specific conditions of your home. For example, in areas near Seahurst Beach, we often find salt air corrosion that leads to plumbing leaks. In Gregory Heights, older homes may have original insulation that holds moisture. We address the root cause, not just the smell. If you need musty odor elimination in Seahurst WA, we can help.

Service Areas

Seahurst Town Center

Older homes with basements and crawl spaces. We often find mold from foundation leaks and poor drainage.

Seahurst Beach

High humidity and salt air. We see mold in crawl spaces and attics, often from roof leaks and corrosion.

Eagle Landing

Newer construction with tight building envelopes. We find mold from condensation and HVAC issues.

Gregory Heights

Homes with original insulation and older plumbing. Slow leaks often lead to hidden mold growth.

Shorewood

Properties near wooded areas with shade and moisture. Attic mold and crawl space mold are common.

Local Considerations

High humidity year-round

Humidity above 60% promotes mold growth. We use dehumidifiers and recommend ventilation improvements to keep indoor humidity below 50%.

Frequent winter rain

Rain can penetrate roofs, foundations, and windows. We inspect for water intrusion and address leaks before mold returns.

Older housing stock

Homes built before 1980 may have asbestos or lead paint. We are EPA Lead-Safe Certified and follow safe practices during remediation.

Crawl space construction

Many Seahurst homes have vented crawl spaces that allow moisture in. We install vapor barriers and improve drainage to prevent mold.

Crawl Space Mold Odor Removal in Seahurst

Before

A homeowner in Seahurst Heights noticed a musty smell in their living room. The crawl space had visible mold on floor joists and insulation. Moisture readings were above 20% in several areas.

After

We removed 300 sq ft of moldy insulation, HEPA vacuumed the framing, applied antimicrobial treatment, and fogged the space. We installed a new vapor barrier. Post-remediation moisture readings were below 15%. The musty smell was gone.

Maintenance & Follow-up

We recommended running a dehumidifier in the crawl space and checking for leaks annually. The homeowner now monitors humidity with a simple gauge.

Before

A condo near Seahurst Beach had a persistent musty smell in the bathroom. The exhaust fan was not working, and mold was growing behind the shower wall. The drywall was soft and discolored.

After

We removed 40 sq ft of moldy drywall, treated the framing, and installed a new exhaust fan. We fogged the bathroom and ran an air scrubber for 24 hours. The smell was eliminated, and moisture levels returned to normal.

Maintenance & Follow-up

The owner now runs the exhaust fan for 20 minutes after showers and wipes down surfaces weekly. We recommended a humidity monitor.

Before

After a winter storm, a Shorewood homeowner noticed a musty odor in the upstairs bedrooms. We found mold on roof sheathing and insulation from a leak. Thermal imaging showed wet areas across 100 sq ft.

After

We removed the moldy insulation, HEPA vacuumed the sheathing, and treated with antimicrobials. We also repaired the roof leak. After fogging and air scrubbing, the attic was mold-free. The odor was gone.

Maintenance & Follow-up

We recommended annual roof inspections and improving attic ventilation. The homeowner added a ridge vent to reduce moisture.

Frequently Asked Questions About Odor Removal Mold in Seahurst

Have questions? We have answers.

Call Us
How much does mold odor removal cost in Seahurst Washington?

Most mold odor removal jobs in Seahurst cost between $500 and $3,500, with the average around $1,800. The price depends on the size of the mold colony, where it is located, and how much material must be removed. Crawl space jobs tend to cost more because they require more labor and containment. We provide a written scope and price before any work begins.

How do you get rid of musty mold smell in Seahurst WA?

You get rid of musty mold smell by removing the mold colony causing it. That means finding the moisture source, removing contaminated materials, HEPA vacuuming all surfaces, and treating the area with antimicrobial solutions and fogging. Air scrubbers run for 24-48 hours to capture remaining spores. Masking the smell with air fresheners does not work because the mold is still active.

What causes musty odor in Seahurst homes?

Musty odors in Seahurst homes usually come from mold growth in crawl spaces, attics, or bathrooms. The Puget Sound climate keeps humidity high, and older homes often lack proper vapor barriers or ventilation. Common causes include plumbing leaks, roof leaks, poor drainage, and condensation. Once mold colonizes drywall, insulation, or wood, it releases gases that create the musty smell.

Who does mold odor removal in Seahurst Washington?

Mold Remediation Service Seahurst provides mold odor removal in Seahurst, Washington. We are a local company founded in 2021, with IICRC WRT and AMRT certifications and an EPA Lead-Safe Certified Firm designation. We serve all Seahurst neighborhoods, including Seahurst Town Center, Seahurst Beach, Eagle Landing, and Shorewood. Call (833) 929-5837 to schedule an inspection.

Trust and Proof

Certifications

IICRC Certified Firm by Institute of Inspection, Cleaning and Restoration Certification
IICRC WRT (Water Damage Restoration Technician) by IICRC
IICRC AMRT (Applied Microbial Remediation Technician) by IICRC
EPA Lead-Safe Certified Firm by U.S. Environmental Protection Agency
Washington State Department of Labor & Industries Contractor License by Washington State Department of Labor & Industries

Reviews

Google

Mold Remediation Service Seahurst removed mold from our crawl space and eliminated the musty smell. They were professional, on time, and explained everything. The price was fair. I highly recommend them.

Yelp

We had a mold issue in our attic after a roof leak. The team was quick to respond and did a thorough job. They also provided documentation for our insurance. The odor is gone.

BBB

I appreciated the detailed inspection and written estimate. They found mold behind our bathroom wall that we did not know about. The remediation was clean and efficient. No more musty smell.

Google

As a property manager, I need reliable vendors. Mold Remediation Service Seahurst is now my go-to for mold issues. They are responsive, certified, and do quality work. Tenants are happy.

Related Services

Mold Inspection Near Me

A mold inspection is the first step in odor removal. We use moisture meters and thermal cameras to find hidden mold that may be causing the smell. If you are searching for mold inspection near me in Seahurst, we can usually schedule within 24 hours.

Mold Inspection Near Me

Mold Inspection

Our mold inspection service identifies the type and extent of mold growth. For odor removal, we need to know where the colony is and how far it has spread. We provide a written report with photos and moisture readings.

Mold Inspection

Mold Testing

Mold testing confirms whether the musty odor is from active mold growth and identifies the species. We collect air and surface samples and send them to an accredited lab. Results typically come back in 2-3 business days.

Mold Testing

Mold Testing Near Me

If you need mold testing near me in Seahurst, we offer same-day and next-day appointments. Testing is often combined with odor removal to verify that the source has been eliminated. We use InstaScope for real-time spore counts when needed.

Mold Testing Near Me

Certified Mold Inspector

Our certified mold inspectors hold IICRC and ACAC credentials. They can identify mold species, assess moisture sources, and recommend a remediation plan. For odor removal, their inspection ensures we target the right area.

Certified Mold Inspector

Black Mold Inspection

Black mold (Stachybotrys) often produces a strong musty odor. Our black mold inspection service locates toxic mold growth and assesses the risk. If black mold is present, we follow ANSI/IICRC S520 protocols for safe removal.

Black Mold Inspection

Home Mold Inspection

A home mold inspection covers crawl spaces, attics, bathrooms, basements, and HVAC systems. We look for moisture problems that lead to mold and odor. This service is ideal for homeowners who notice a persistent musty smell.

Home Mold Inspection

Residential Mold Testing

Residential mold testing helps pinpoint the source of odors in your home. We test air and surfaces, and we can also test your HVAC system. Results guide our odor removal plan so we treat the right areas.

Residential Mold Testing

Commercial Mold Inspection

Commercial mold inspection for offices, retail, and rental properties. Musty odors drive tenants away and can affect employee health. We inspect large spaces and provide documentation for property managers and owners.

Commercial Mold Inspection

Mold Remediation Company

As a mold remediation company, we remove mold and eliminate odors at the source. Our services include containment, physical removal, HEPA vacuuming, antimicrobial treatment, and fogging. We serve Seahurst and South King County.

Mold Remediation Company

Emergency Mold Testing Services

Emergency mold testing is available for urgent situations like flooding or burst pipes. If you smell musty odors after water damage, call us at (833) 929-5837. We can often respond within 60-90 minutes.

Emergency Mold Testing Services

Same Day Mold Testing

Same day mold testing is available for Seahurst residents. We can collect samples and, in some cases, provide preliminary results the same day. This is useful when you need to make quick decisions about remediation.

Same Day Mold Testing

Basement Mold Inspection

Basement mold inspection focuses on below-grade spaces where moisture accumulates. Musty odors often originate in basements. We check walls, floors, and crawl spaces for hidden mold and moisture.

Basement Mold Inspection

Attic Mold Testing And Removal

Attic mold testing and removal addresses roof leaks and poor ventilation that cause mold growth. Attic mold can produce odors that drift into living spaces. We remove contaminated insulation and treat framing.

Attic Mold Testing And Removal

Air Quality And Mold Testing

Air quality and mold testing measures spore levels in your indoor air. If you have musty odors, air testing can confirm mold contamination. We use InstaScope for real-time results and lab samples for detailed analysis.

Air Quality And Mold Testing

Mold Remediation Near Me

If you are searching for mold remediation near me in Seahurst, we are local and can respond quickly. Our remediation services include odor removal, mold removal, and post-remediation verification. Call for a free phone consultation.

Mold Remediation Near Me

Crawl Space Mold Removal

Crawl space mold removal is one of our most common services. Crawl spaces in Seahurst often have high humidity and poor ventilation. We remove mold, install vapor barriers, and treat odors with fogging.

Crawl Space Mold Removal

Bathroom Mold Removal Service

Bathroom mold removal service targets mold on walls, ceilings, and grout. Bathroom mold often causes musty odors. We remove affected drywall, treat framing, and improve ventilation to prevent recurrence.

Bathroom Mold Removal Service

Toxic Mold Removal

Toxic mold removal follows strict protocols for black mold and other toxigenic species. We use containment, negative air machines, and HEPA filtration to protect your home. Odor removal is part of the process.

Toxic Mold Removal

Mold Abatement

Mold abatement is the process of removing mold and preventing its return. We combine physical removal, antimicrobial treatment, and moisture control. For odor issues, abatement eliminates the source.

Mold Abatement

Professional Mold Removal

Professional mold removal ensures the job is done safely and completely. Our technicians are trained and certified. We use commercial-grade equipment like Dri-Eaz air scrubbers and Phoenix Restoration dehumidifiers.

Professional Mold Removal

Mold Cleanup Near Me

Mold cleanup near me in Seahurst means fast, local service. We clean up mold and odors from water damage, leaks, and high humidity. Our team is available for emergency calls.

Mold Cleanup Near Me

Water Damage Mold Remediation

Water damage mold remediation addresses mold that grows after leaks or flooding. We extract water, dry the structure, and remove mold. Odor removal is included to eliminate musty smells.

Water Damage Mold Remediation

Mold Spore Testing

Mold spore testing measures the concentration of spores in your air. High spore counts often correlate with musty odors. We use spore traps and lab analysis to give you accurate numbers.

Mold Spore Testing

Post Remediation Mold Testing

Post remediation mold testing verifies that mold and odors have been eliminated. We perform air and surface testing after remediation. If levels are not clear, we re-treat at no additional cost.

Post Remediation Mold Testing

Mold Fogging Treatment

Mold fogging treatment uses a fogging machine to distribute antimicrobial solutions into cavities and voids. This is effective for odor removal because it reaches areas that manual cleaning cannot. We use Concrobium and Benefect.

Mold Fogging Treatment

Dry Ice Blasting Mold

Dry ice blasting mold removes mold from framing and hard surfaces without chemicals. It is ideal for attics and crawl spaces. We use dry ice blasting machines to clean wood and concrete, then treat with antimicrobials.

Dry Ice Blasting Mold

Affordable Mold Remediation

Affordable mold remediation does not mean cutting corners. We provide transparent pricing and written scopes. For odor removal, we focus on the source to avoid repeat costs. Financing options may be available.

Affordable Mold Remediation

24 Hour Mold Removal

24 hour mold removal is available for emergencies. If you have a musty smell after a leak or flood, call us at (833) 929-5837. We can often respond within 60-90 minutes in Seahurst.

24 Hour Mold Removal

Get Odor Removal Mold in Seahurst, Washington Today

If your home or business smells musty, do not wait. Mold spreads and odors get worse. Call Mold Remediation Service Seahurst at (833) 929-5837 for a same-day inspection. We are IICRC certified, EPA Lead-Safe, and locally owned. We will find the source, remove the mold, and eliminate the odor.